Natürliche belüftungssystem – NOVA AIR
Nova Air from J. Orbesen Teknik ApS is a wind-assisted naturally ventilation system for comfort ventilation.
The system is designed with the advanced air intakes located just above ground level and the outlet vents sitting in the ceiling. Due to the nature of natural convection, the heated air will rise towards the ceiling, while the chimney with a wind-assisted, energy-effective ventilation wind turbine will take care of sucking the air to the outside.
Since a great part of the system is based on natural phenomenons, such as wind and natural convection, the energy consumption of the complete system is very low and environmental friendly. Furthermore the maintenance of the system is very low. You don’t have air ducts, filters or heat exchangers that needs cumbersome cleaning.
The indoor climate regulated through sensing and controlling the temperature, CO2-level and the airflow through the air intake.
The Nova Air system is a modular system where you can use all the components and a combination or as stand-alone of your choice. So whether you need a complete system or a ventilation wind turbine, we can find something that suits your needs. For more information, please contact us
If you need a new cylinder CLICK HERE
Wind cowls:
Info sheet Danish (pdf)
PDF files from Nova Air website in German
1. Zuluft Geräte
51-101 Der Elemente
51-109 Einzelteile der Elemente
51-111 Überall einsetzbar
51-610 Gebrauchanweisning Elemente
51-611 Wartung 1 f/Elemente
51-612 Wartung 2 f/Elemente
51-675 Faltelemente austauschen
51-676 Zylinder austauschen
2. Lüftungs klappe
52-209 Lüftungs- / Dachklappe
52-209 Sondergrösse / Sonderstärke 52-210 Elemente als Abluft
52-232 Luftaustash Kapacität
52-239 Sondergrösse / Sonderstärke
52-611 Gebrauchsanweisung Dachklappe
52-612 Wartung 1 Dachklappe
52-614 Wartung 2 Dachklappe -Alte
52-622 Wartung 2 Dachklappe- Neue
52-890- Faustregel
3. Motoren
53-300-motorendetails-pdf
53-312 Spannungsabfall
53-330 Termo hydrauliche Zylinder
53-395 Trafo + Schaltplan
53-396 Fotos Motoren in Dachklappe
4. Montierung
54-104 Glasstärke 44 mm
54-511 Einbau typen : Elemente
54-512 Fals profile f/Elemente
54-513 Mehere Elemente in die Höhe
54-530 Mont-Anweis Glass oben an
54-595 Sicherunsgsplinte am Klappe
54-596 Gewebe austauschen 1+2+3
54-597 Motor nachher montieren
54-730 Fotos Wintergärten
5. Bestell formulare
55-520 Bestellmass Elemente
55-570 A1 + D1
55-571 A2 + D2
55-572 E + B
55-573 Bestellmass Dachklappen
55-580 Lieferzeit
AIR OUTTAKE | AIR INTAKE | CONTROL UNIT |
– Wind turbine with energy efficient back-up motor | – Air flow sensor | – CO2 Control |
– Up to 2000 m3/hr | – Temperature sensor | – Temperature control |
– Anti-condensation coating | – Temperature sensitive damper/intake | – Integrates with CTS |
– Baffler | – Discreet design | – Air flow control |
– Pivotable air flow control/ blade damper | – Rain, bug and burglar proof | – Summer/winther modes |